George Nelson Hand / Quartz Movement Replacement Guide
German made high torque quartz movement for all Vitra produced George Nelson clocks. The wooden Fan, Wheel and Polygon clocks are the only exceptions. They use a longer shaft that you will need to transfer to the new movement.
If your movement has been replaced before and doesn’t match the movement shown, send us a photo of the front of your clock and the back of your movement before you order and we’ll confirm. Do not call. We can’t accept returns on movements, so check now. You can also consult our replacement guide and compare it to your hands and movement.
How to replace movement and hands
Replacing the battery
All wall clocks are powered by a AA 1.5 V battery (included). Inserting the battery: Angle the battery in, pressing the negative flat side of the battery into the spring, and then push down. If your clock is running slow at any point, try a new battery (we recommend Duracell or Energizer).

Extending the life of the movement
The clock movement is easily replaced, but with good care, it can last 10-25 years. To extend the movement's life, change the battery once a year (during fall or spring time change is a good idea). Keep dust from building up on the hands and movement. Do not display the clock in a space that gets intense sunlight and/or heat throughout the day. Adjust the hands using the dial or knob on the back of the clock only. It's best to rotate the dial so the hands move in a clockwise direction, but it's OK for them to rotate counterclockwise (for example, when setting the time back an hour in the fall).
Warranty & Repairs
Please contact us if you have any issue with your replacement movement—whether in or out of warranty. Our movements are covered under a 5-year parts warranty by Clock Forward. If our replacement movement fails within 5 years, we will send a replacement.
