Midorimenou (Green Agate)

Remove the leather cover by pulling the leather tab, and turn the time adjustment wheel so the hands rotate in a clockwise direction. It is ok if the hands move slightly counter-clockwise if you are adjusting for a few minutes. Never set the time by manipulating the hands directly. Replace the leather cover when finished.

The clock is powered by one AA 1.5v battery. We ship with an Energizer lithium long lasting leak-proof battery that should last for several years. We also recommend Duracell alkaline batteries. It is important to remove or replace the battery once it stops working to prevent battery leakage and damage. Using a good battery helps extend the life of the movement.

When replacing the battery, lift the old battery out from the right (negative side). You may need to use a flathead screwdriver to gently assist in prying the battery out. Insert the new battery from the right (negative side) first by pushing into the spring, and then push down the positive (left) side.

For a small fee, we can custom engrave a short message (and some logos) on the back leather piece. For larger bulk orders, it is possible to engrave the entire back.

Clean the clock occasionally with a soft microfiber cloth. The Zelkova wood is sealed with a clear polyurethane coat to resist wear. The mineral pigment dial is scratchable and should be carefully dusted with a soft brush or handheld blower (for cameras and small electronics). Change the battery as soon as the clock slows or stops. If you need to store your clock for a lengthy period, please remove the battery.

Avoid exposing the clock to direct sunlight to prevent the natural pigments from fading. Do not place in a very humid environment as warping and/or mold growth may occur.

We know selecting the 'right' Hanamokko clock variant can be a difficult decision. As a store policy we do not accept returns, but if you are debating between 2 clocks, we will allow you to purchase 2 and return 1. Please contact us first. Also contact us in advance with all questions before purchasing and we will be happy to share our insight about specific colors. It is easier for everyone if we get it right the first time. Please contact us immediately if your clock arrives damaged or is malfunctioning. Though rare, these are mechanical works and occassionally have issues.

C-Brain clocks are guaranteed against defects under normal use, for 2 years on parts & labor from the date of purchase. Normal wear and tear damage or defects are excluded from warranty after 2 years. If purchased through Clock Forward, the movement is covered an additional 2 years (4 years total) warranty. We make the return and exchange process as simpe as possible.

All mechanical parts are repairable and/or replaceable. Please contact us if you have any problems throughout the life of your clock—whether in or out of warranty.

Hanamokko Tou is created exclusively for Clock Forward. Tou, meaning 10, refers to the 10cm face diameter and 10oz weight. It shares the same form, process, skilled artisans and materials as the smaller Hanamokko. It is more substantial with a clock face that is 60% larger and a weight that is more than double. Hanamokko Tou may show better in a larger interior and some may find it to be a more luxurious gift. Hanamokko Tou is numbered and created in small batches of 100 total that take 6 months to produce.

On hand items ship directly from us in NC. We try to keep all variants in stock. If we need to custom order your selection, it will ship to us from Japan first for inspection and customs clearance. For multiple purchases, corporate gifts and deadline sensitive orders, please contact us before purchasing.

From the carved wooden bodies and native Zelkova wood to the hand-painted faces, all production takes place in Japan. The movement is made by Seiko in Thailand.

No, we handle importing and ship directly to you from the US. There is no additional customs charge or hassle.

The Hanamokko Tou has a larger face and hour markers and is typically a better choice for larger interiors. We also recommend variants that either have dark hands on a light face or light hands on a dark face for highest visibility.

Iwa-enogu is paint made from pulverized natural minerals. Mineral pigments were introduced to Japan 1400 years ago during the Asuka period. The pigment is known for its lightfastness, durability, color saturation, gritty texture and matt glimmering qualities. It is skillfully brushed in multiple layers onto a surface (ground) with a binder. On the Hanamokko Clock, the ground is paper made by Mayumi Ishikawa in Kanazawa City. The paper is then carefully adhered to the Zelkova wood body. Although durable, iwa-enogu surfaces can be scratched and should be treated like any painting.

Rokuro-hiki is a process where wood is rotated on a potter's wheel (rokuro) and shaped with a sharp blade. It is carved in the Yamanaka region—known for its lacquerware dating back to the 1500s.

There is no ticking sound. The clock runs on a battery-operated silent sweep Seiko quartz mechanical movement. It is suitable for bedside display.

No. It does not glow in the dark nor is there an LED light. It is viewable in low lighting if some light catches the clock.

No. There is no alarm on this clock.

Our prices include shipping and import duties to the US. We also worked with C-Brain to package the Hanamokko in a more luxurious box. Clock Forward provides a 5 year movement warranty and long lasting lithium battery for our customers only. We also include a brochure that tells a little more about the Hanamokko clock (perfect for gift giving). Should you have any issues with your clock soon after purchase, we make it very easy to return and exchange (or repair if it has been in use for a longer period) without the stress of shipping abroad. Your time is valuable. Please contact us for discounts for multiples/corporate orders.

With the proper care, quartz clock movements can last 15-20 years. They are reliable and inexpensive to replace. The movement is covered under a 5 year warranty for Clock Forward customers. For purchases out of warranty, we will have a replacement kit and instructions available.

We engrave the back leather cover of the clock below the logo using a CO2 laser. It's a small surface area, so be brief. Please allow an additional 1-2 weeks for engraving. For larger orders, it is possible to engrave blank leather backs without the C-Brain logo.