QLOCKTWO CLASSIC Front Cover - Acrylic Glass

• QLOCKTWO CLASSIC Manual (pdf)
• QLOCKTWO Wall Mounting Template & Instructions (pdf)

Each language requires a separate Front Cover, however the same clock matrix body can be used for every language (except Arabic). To set your language:

• Press & simultaneously hold [] + [ 60 ] for 3 seconds to access language menu.

• The language currently set is shown in capital letters.
• Press [] repeatedly until the appropriate language version appears.
• Press [60] to save the new language and exit language menu.

You only need to purchase one clock to enjoy multiple looks and languages with different Front Covers! The CLASSIC clock body is compatible with all CLASSIC Front Cover variants and languages.*
*Arabic is the only Front Cover variant that requires its own unique clock model body.

The Front Cover is held in place with magnets.

• Have a clean, level surface ready to place the Front Cover on before removing it.
• For all Stainless Steel Front Covers: use cotton gloves when handling (included with delivery).
• Carefully pull off the Front Cover to remove it. Always set it down with the front facing up to avoid scratches.
• For all Acrylic Glass Front Covers: remove the Front Cover from the clock body before removing the protective film. Place the Front Cover on a clean, even surface. Remove the protective film slowly, beginning at a corner.
• Replace the Front Cover accurately onto the front of the clock body.

If you have multiple Front Covers that are not in use, we recommend wrapping them in a scratch resistant material such as tyvek, or storing them in the plastic sleeve they arrive in and carefully sandwiching between foam core or cardboard cut at least 1-2” larger than the Front Cover’s edges to prevent accidental damage.

Your clock can be displayed on a table top or shelf. Simply lower the clock vertically into the acrylic base (DO NOT slide the base on across the bottom of the Front Cover, ie. left to right).

• For Acrylic Glass Front Covers, use the side labelled ‘acrylic’. The soft padding within the acrylic base slot should be touching the Front Cover.

• For Stainless Steel Front Covers, use the side labeled ‘steel’. The soft padding within the acrylic base slot should be touching the Front Cover. Platinum, Gold, and Silver models are for wall-mounting ONLY (the acrylic base may damage these covers). If your stainless steel Front Cover came with 2 acrylic feet and instructions, ignore those, and use the solid acrylic base instead.

Use mounting template and consult instructions. The CLASSIC comes with an 84” cord. If you need a longer cord, 137” lengths are available.

If you lost your mounting template copy, be sure to print it to scale. You may need to find someone with an oversize printer such as Kinkos, Staples, or a UPS Store.

• QLOCKTWO Wall Mounting Template & Instructions (pdf)

• Do not use the clock in rooms where humidity is high (e.g. bathrooms). This can damage the clock circuitry
• Do not place the clock directly adjacent to electronic devices that could be sensitive to the clock’s magnets (such as a hard drive).
• Do not place the clock where it could incur unintentional knocks or pulling of the cables.
• Avoid direct heat radiation, for example heat from radiators
• Avoid direct sunlight

The Front Cover is held in place with magnets and should be taken off for cleaning. Have a clean, level surface ready to place it on. Carefully pull off the Front Cover to remove it. Always set it down with the front facing up to avoid scratches. Follow cleaing instructions below depending on your variant. After cleaning, replace the Front Cover accurately onto the front of the case.

CAUTION: Polishing cloths and solvents (e.g. turpentine or benzene), and detergents containing alcohol (e.g. spirit) may damage the surfaces. Use cotton gloves (included with delivery) whenever handling stainless steel Front Covers.

• Acrylic Glass Front Cover (QOLOR)
  Remove slight stains with the microfiber cloth (included with delivery). Remove stubborn stains with a suitable acrylic glass detergent or with a soft cloth and water containing a little dishwasher detergent.

• Brushed Stainless Steel Front Cover (STAINLESS STEEL)
  Remove slight stains with the microfiber cloth (included with delivery). Remove stubborn stains with a suitable stainless steel cleaner. We use Weiman's Stainless Steel wipes: wipe it on, use a microfiber cloth to take off the excess and buff it.

• Coated Stainless Steel Front Covers
  (BLACK-, WHITE-, RED-, GREY PEPPER, HAZELNUT)
  Remove dirt with a soft cloth and water containing a little dishwasher detergent.
  (GOLD, SILVER & GOLD, PLATINUM, RUST, RAW IRON, VINTAGE COPPER, COPPER)
  Carefully dust the surfaces with a soft, dry, dust-free cotton cloth or with a soft, fine brush without applying any pressure.

All QLOCKTWO Stainless Steel (Front Cover only) variants are eligible for a full refund when returned in their original, shipped condition. QLOCKTWO Clock Matrix + Front Cover packages (TOUCH & CLASSIC) are eligible for a full refund when returned in new, unopened box condition. We will take back an opened QLOCKTWO box within 30 days if your purchase arrives with all the original parts in new condition; the customer must pay return shipping + a 10% restocking fee. QLOCKTWO LARGE models are NOT eligible for return. Read our full return policy »

Most of our pre-sale questions involve which Front Cover finish to purchase. We can help you decide. Like any work of art, experiencing it in person is different from looking at in on your smartphone or monitor. Depending on your choices, we can either send a front cover or sample to help you decide. We know sometimes you have to see art in the actual space to decide (lighting, wall color, surrounding decor, etc. can all influence your selection). If you are considering a LARGE over a CLASSIC, we'd be happy to photoshop it in a space to help you decide. Please contact us with any pre-sale questions before purchasing.